Coram Alcove Shower Pod 1200 PODAL1200+PSL12CUP
Coram

Coram Alcove Shower Pod 1200

Product Code: CORAM-PODAL1200+PSL12CUP

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no known direct replacements.

If you need any further assistance, please do not hesitate to contact us.

Trustpilot

You might also be interested in

(56)

Mouldcure Pink and Black Mould Removal Spray (750ml bottle) - HC0028/1-750

R.R.P £9.95
Our Price
£7.99
Sale
In Stock
(12)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

  • 1195 x 805 x 2275mm
  • Premier Polished Siilver Frame
  • Thermostatic Bar Mixer Valve complete with riser
  • High quality shower door

    • Product Specification

    Coram Shower Pods is a leading specialist in the design and manufacturer of high quality, robust and completely watertight showering cubicles. Coram's innovative design provides the fastest and easiest means of creating a completely watertight shower installation. No tiling to worry about - these Pods once fitted are completely watertight as the tray and wall up-stands come moulded together.

    Coram Showerpods have exceeded all requirements for life time cost and installation in a number of environments ranging from leading UK house builders, educational establishments, commercial facilities and even the Military.

    All the showering and thermostatic valve parts come factory fitted so it’s just a case of connecting the waste and water supplies. Coram also offer a lifetime watertight guarantee with all their Shower Pods.

    Included with each Shower Pod is a free thermostatic mixer bar and riser rail.

    Thermostatic Mixer Valve

    Thermostatic Mixer Valve

    Riser Rail

    Riser Rail

     

    Fitting the Shower Pod

    The walls and base of the shower pod are supplied in two sturdy cartons, which can easily be manoeuvred on site up stairwells and through doorways to the exact location.

    The pod is robustly constructed from GRP (glass reinforced polymer) and can be fitted by one man in the simple stages shown below.

    Position and fit the fixing batons to the wall.

    Locate, level and fix the base.

    Slot the side panels to the base and fix to the back wall batons, using the spacer provided to ensure that the correct gap is left for the back panel.

    The back panel can then be slotted into position and secured with a single screw.

    The front edges of the side panels can then be secured to the side wall batons and the fixing screws will be concealed by the door frame.

    The Shower Doors

    Coram’s shower doors have been designed to be faster and easier to fit than any other on the market, which is why Coram have become a leading provider of shower enclosures to trade installers. Each shower door is supplied fully assembled, so that on site all that is required is to fit the handle and then install it using the wall channels as shown below.

    When fitting the shower door the first thing is to position the wall channels and drill the screw holes.

    The door is finally secured by drilling through the wall channels into the door frame and fixing with screws.

    The wall channels are then slotted onto the door and screw fixed to the wall.

    Fitting the mixer

    A special mounting plate is factory fitted to the pod wall, which means that on site you simply need to connect the mixer to the hot and cold feeds with the valve nuts. On the reverse of the mounting plate flexible pipes hang down the back of the unit and these can be accessed via the removable panel at the front of the base to allow easy attachment to the piped supplies with the push-fit connectors provided. The rest of the shower fittings are then simply screw fixed.

    The built-in valve is factory fitted, which means that on site you simply need to connect the mixer to the hot and cold feeds on the reverse of the valve and connect the shower hose via the bulkhead. The rest of the shower fittings are then simply screw fixed.

    For special commercial application an anti-ligature fixed spray head is also available.

    A unique mounting plate is factory fitted to the pod wall.

    The mixer simply connects to the hot and cold feeds with the valve nuts.

    Flexible pipes hang down the back of the unit.

    The pipes are accessed via the removable panel at the front of the base.

     

    Allowing easy attachment to the piped supplies with the push-fit connectors provided.

    		  
    Delivery for these products usually takes around two weeks. On confirmation of order, we will be able to confirm a delivery date. When going through Checkout, please supply a current telephone number.

    FAQs

    Do you have a question regarding this product?
    Call us directly 0131 538 4343 or click the button to ask us a question.


    Ask a Question

    Be the first to ask a question about this product.

    REVIEWS

    Have you purchased this product from Shower Doctor?
    Why not leave a review here and help other buyers that are looking.

    Submit a review for this product

    Be the first to write a review about this product.