No Hot Water but power

When the shower is turned on there is no hot water but power neon is on. I have traced power through to the exit of what i think is the microswitch, power at both red cables but on power at brown on way out can anyone help
Asked 12 years ago by Anonymous

I think you may have a faulty Thermal Cut Out


A faulty TCO will have no continuity across the two terminals (The black thing on top of the heating tank)

Therefore a good TCO will have power at both connections and a faulty TCO will have power at only one.

(The function of the TCO is, if the water over heats it cuts the power off to the elements until the water cools, this can take up to 15mins)

See Video.

http://www.youtube.com/user/showerdoc#p/u/2/_zi8JbEMYMs

 

After fitting a new TCO

 

When fitting a new TCO listen to the shower, after it has completed its first on/off cycle, if when it is switched off you hear it continuing to heat (Noise like a kettle starting to boil) this will mean that there is a switch or a relay that is stuck in the on position, this is keeping an element energised and this is probably what caused the original TCO to fail.

If this is the case replace the faulty switch or relay and make sure that you switch the shower off at the isolating switch when the shower is not in use because this may cause the new TCO to fail.

 

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Creda 8500DL - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers

For any other support request please get in touch.