Shower running cold with overheat light on

I purchased a new TCO after reading and testing the originalTCO as suggested in your Q&A section However it only worked for 3 days and I am back to where I started from running permanently cold with the overheat light on. I tend to wonder is it worth spending anymore money on this unit or just buy a new one.



Thanks
Asked 10 years ago by Francis

After fitting a new TCO

Whenfitting a new TCO listen to the shower, after it has completed its first on/offcycle, if when it is switched off you hear it continuing to heat (Noise like akettle starting to boil) this will mean that there is a switch or a relay thatis stuck in the on position, this is keeping an element energised and this isprobably what caused the original TCO to fail.

If thisis the case replace the faulty switch or relay and make sure that you switch theshower off at the isolating switch when the shower is not in use because thismay cause the new TCO to fail.

Failing this , maybe an upgrate is on the cards.

http://www.showerdoc.com/showers/electric-showers

Answered 10 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Creda 950DL Electric Shower (2006 - Current) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers

For any other support request please get in touch.