This question is regarding Creda 950DL - Shower Spares

creda 950DL not working

There is no power when i switch the on/off button on ,the pull cord is on,iv'e changed the on/off button ,but still not working?
Asked 12 years ago by Peter

If the light goes out on the pull cord switch when you turn the shower on then you have a faulty pull cord if it stays on then it may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it is not working!)

 

If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.

 

If you don’t have a multimeter  we sell them  with a guide on how to use them for checking and testing the various parts of your shower.

 

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries

(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

 

 

 

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Creda 950DL - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers

For any other support request please get in touch.