creda 950dl showers
I should say that most jobs on showers although relatively easy (from my point of view) can be fiddly and an extra pair of hands, long thin fingers and the strength in your hands of an all in wrestler are a help!
The secret is, observing very carefully when things are taken to bits, their order and orientation, taking notes and/or photos as you go can also be a help.
When you are working with electricity and water so make sure it is switched off and turned off before you start.
If you think you can do the job but aren’t just that confident, it may help to buy the part and compare it to the faulty part, you will then be able to see where the screws, wires, nuts, or washers etc. go, if then you think it is to complicated, at least you will have the part when the plumber or electrician arrives.
With the TCO you should remove the screws holding it to the tank, pull the TCO out slightly and switch over the wires on each side to the new TCO. Then replace and reattach to the tank.Answered 9 years ago by Anonymous
View Spares and Order Parts:
Creda 950DL Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Creda 950DL - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers
For any other support request please get in touch.