This question is regarding Creda Expressions 500s - Shower Spares

Too hot on High setting And Luke Warm on Medium

The shower is about 3 years old. when it is on High it is really hot, as in boiling hot, if i vary the flow control the temperature is the same until it is at setting 9 then it dribbles out and shuts off due to over heating. I keep it at medium and its luke warm water that comes out. i have good pressure of water going to the inlet and i checked the Filter before the solenoid which is clear.



it is a 9.5kw shower.

Asked 9 years ago by Anonymous
Forgetting about the temperature, turn the shower from fully hot to fully cold. At fully hot you should have not much more than a dribble coming from the hose, and on fully cold you should have a good strong flow. If you do not have this difference then you may have a faulty flow/stabilizer valve.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Creda Expressions 500s - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers

For any other support request please get in touch.