This question is regarding Creda Florida Plus Electric Shower (2004 - Current) - Shower Spares

over heat light on

the shower has plenty of pressure but is now running cold with the overheat light lit .There is no currant to the thermal switch no 1 on your parts list whats wrong ,Phil
Asked 9 years ago by Anonymous

Presumably you mean that there is power going to ther thermal switch but not away from it? Which means it needs replaced.

After fitting a new TCO

When fitting a new TCO listen to the shower, after it has completed its first on/off cycle, if when it is switched off you hear it continuing to heat (Noise like a kettle starting to boil) this will mean that there is a switch or a relay that is stuck in the on position, this is keeping an element energised and this is probably what caused the original TCO to fail.

If this is the case replace the faulty switch or relay and make sure that you switch the shower off at the isolating switch when the shower is not in use because this may cause the new TCO to fail.



Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Creda Florida Plus Electric Shower (2004 - Current) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers

For any other support request please get in touch.