This question is regarding Creda Spray Spa Electric Shower - 832/7565 (2006 - Current) - Shower Spares

Creda Spa shower

When this shower is first switched on the water is warm at low pressure. when the water is turned up the water stays cold even after adjustments from cold medium or high. the element resistance is ok at 18 ohms but no voltage on one set of heater terminals .Not stripped it down yet but suspect microswitch, what do you think
Asked 9 years ago by Michael

If there is no voltage then almost certainly a faulty micro switch.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Creda Spray Spa Electric Shower - 832/7565 (2006 - Current) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Creda Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Creda Electric Showers

For any other support request please get in touch.