Instructions to fit?
How to change the temperature on a thermostatic valve
Turn the water off at the mains
On the back of the tap head there is a cover cap remove this.
Remove the 2ml grub screw with a 2ml Allen key.
Remove handle.
Remove the chrome collar with a Phillips screw in.
Remove the shroud which is on a thread.
Remove the nut holding the cartridge in place.
Then remove the cartridge by turning this.
RE CALLIBRATE
To recalibrate follow steps 1-4 and the pop the collar back on and turn the cartridge all the way to the right and then back to the left adding hot as you go, preferably with the shower or bath on, when you get the required maximum temperature stop and put everything back on.
How to clean a Thermostat
Follow the steps above. Once you have removed the cartridge, you need to soak this in 50% white vinegar and 50% water. Leave immersed in this solutions as long as possible. Then replace this back in the valve the longer you leave this the more lime scale debris will be removed.
Merry Christmas and all the best for 2021.
Answered 3 years ago by Liam Corrigan
View Product and Order Online:
Do you require any further help with Tap or Shower Cartridges?
Please click the following link if you would like to see other answers or ask a question regarding the Crosswater Thermostatic Cartridge - CA43-059
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Crosswater Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.
If you would like to buy this cartridge or look others from the same brand, please view our Replacement Crosswater Cartridges (All)
For any other support request please get in touch.