Crosswater Bathstore Thermostatic Cartridridge With T20 Spind - DC70-T20

Thermostatic Cartridge T20 Spindle two rows teeth

Crosswater / Ultra - Minimalist thermostatic plastic cartridge T20

Spindle diameter approx 7.5mm

Please see Important info below before ordering

DC70 Cartridge application examples:
Dual shower valves and products which require independent control of the water temperature and flow control.

Technical data of all Valquest products:
Max working pressure: 10 bar static
Min working pressure: 0.1 bar Dynamic 
Hot supply temp: 55ºC - 65ºC 
Cold supply temp: ≤25ºC 
Max inlet ratio: 5:1

PLEASE NOTE:

Spindle diameter approx 7.5mm

This DC70-T20 cartridge has two rows of teeth as you can see from the image above, If your cartridge only has the one row of teeth then you will require a new shower as the levers wont fit to this cartridge now. 

View alternative showers to the right of the page for suitable replacement showers.  

Crosswater / Ultra Minimalist thermostatic plastic cartrridge T20 - ( 2 rows of teeth )

All Valquest thermostatic shower cartridges offer the following benefits:

Manufactured in the UK.

Manufactured from WRAS approved materials.

TMV2/TMV3 compliance can be achieved when using an approved, designated shower body.

Patented thermostatic shower cartridges are manufactured from high grade engineered polymer which is highly resistant to calcium build-up, even in hard water areas.

Full thermal protection to prevent scalding in the event of hot or cold water shut-off. In the event of hot or cold water failure, the valve will shut down within 1.5 seconds.

Quick and easy to install.

Accurate flow control.

Thermostatic control to plus or minus one degree, even if the water pressure fluctuates.

Valquest products are suitable for use on LP and HP applications. 繚 Excellent flow rates - even at low pressure.