This question is regarding Gainsborough ES500 / ES550 - Shower Spares

gainsborough es500 too hot

the temperature of the water is too hot, is there a thermostat control that can be adjusted. If not what is the solution?
Asked 13 years ago by Anonymous

The fact that it is too hot suggests that there is not enough water getting through it to cool it properly.

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.


 

Answered 13 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Gainsborough ES500 / ES550 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Gainsborough Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Gainsborough Electric Showers

For any other support request please get in touch.