This question is regarding Galaxy Aqua 3000 (Electric Shower) - Post 2000 - Shower Spares

Galaxy Shower 9.5

My shower when running is going hot (very) and then cold then hot again is the thermastate which needs rereplacing or do I need a new shower I have had it 4 yrs ?
Asked 12 years ago by Anonymous
This is probably due to a reduction in flow through the unit.
Check that the hose is not kinked or collapsed internally and the shower head is clear.
Check that incoming water mains stopcock and any isolation valve in the feed to the shower are fully open.
Check with your supplier if there has been any reduction in supply flow or pressure.
Check that gauze filter in inlet to solenoid valve is clear.
If all above are ok then it is likely to be the flow valve at fault , repair set can be ordered online by clicking on the link below

http://www.showerdoc.com/shower-spares/galaxy/GALA-SG08086-Galaxy-Flow-Valve-Top-Assy-(comes-with-large-knob)-SG08086

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 3000 (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.