This question is regarding Galaxy Aqua 3000si (Electric Shower) - Post 2000 - Shower Spares

faulty shower aqua 3000 10 .5kw

this shower has worked fine for two years and now heats up until the thearmal cut out comes in and re engages when it is cool enough i have checked the flow wich i think is sufficent could you please give me the part that incorperates the reguar thermostate or any adviceyou can give me.....thanks mark
Asked 12 years ago by Anonymous
If it is not overheating when the thermal cut out operates then it is the TCO which needs to be replaced , it can be ordered online by clicking on this link.

http://www.showerdoc.com/shower-spares/galaxy/GALA-SG06004-Galaxy-Thermal-Cut-Out-SG06004

If it is overheating then;
Check that shower hose is not kinked oor collapsed internally and the head is clear.
Check that incoming water mains stopcock and any isolation valve in feed to the shower are fully open.
Check the gauze filter in the inlet to the solenoid valve is clear.
If all above are ok then it is likely to be the flow valve at fault , repair kit can be ordered online by clicking on this link.

http://www.showerdoc.com/shower-spares/galaxy/GALA-SG08086-Galaxy-Flow-Valve-Top-Assy-(comes-with-large-knob)-SG08086

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 3000si (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.