Galaxy Aqua 3000si

as the incoming water temperture drops so does the temperture of the shower, the shower control is now at mark 10 and the water is only hot, the pressure is also low, turning the control to 6 increases the pressure but the water is cold. is this a problem or is it normal
Asked 11 years ago by Anonymous

It may be a faulty elementin the heating tank (there are two, three in most 10kw showers) you can checkthem with a multi meter you should have a reading of around 12>18 ohms.

If you have power to theelements and no heat it's probably the elements, no power to the elements thenit's probably a micro switch.

If you don’t have amultimeter we sell them at £10 each with a guide on how to use them forchecking and testing the various parts of your shower.

Apart from helping to fixyour shower, they are really useful for checking you have a power supply toappliances, for checking fuses, letting you know much power you have left inbatteries

(so you know if they are dud ornot) and lots of other jobs, in short they are well worth the £10.

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 3000si (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.