This question is regarding Galaxy Aqua 4000si (Electric Shower) - Post 2000 - Shower Spares

after use electrics trip.

Hi, recently after use the shower trips the main breaker, not the breaker dedicated to the shower. once the shower has been isolated the mains breaker can be reset. I've checked the cable for a faulty earth and checked for water and steam contamination with no apparent sign. Checked the seal and all seems tight. The only sign of anything suspect is one of the resistors near the off switch on the pcb has what looks like scorch marks, the left hand resistor as you look at the diagram, could this be my problem? if not could you offer any help?

Thanks, Neil.

Asked 12 years ago by Anonymous

First I would check the isolating switch if it is OK, my next thought would be a faulty earth, I am not sure about the resistor it is one of these things I would have to see to be able to pass any comment on, however the resistors are certainly not a common fault on these showers.

 

 

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 4000si (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.