This question is regarding Galaxy Aqua 4000si (Electric Shower) - Post 2000 - Shower Spares

AQUA 4000si

Only runs on high after it has run on low for about 5 min. Even then it might take several attempts before it runs on hot. After you press the hot button the indicator light dims and power/water is cut off. Even when it continues to work on hot the indicator light is dimmed.



Shower was purchased in October 2012 so not long outside guarantee.
Asked 8 years ago by Beryl

It sounds like a problem with the power supply The things to check first are:

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water getting to your shower to open / close the safety device that allows power through to the elements

If the light is dimming then it is likely that there is a problem with the power supply I would check that all the terminals in the isolator switch are tight (Making sure you turn the power off first!) if these are OK then I think you need a electrician to have a look at it

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 4000si (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.