This question is regarding Galaxy Aqua 4000si (Electric Shower) - Post 2000 - Shower Spares

Shower Stopped Working

Could you please advise me on how to get my shower unit working again. I have checked the water inlet solenoid coil and its OK. What else would stop it working??
Asked 5 years ago by Richard
First check that you are getting voltage to the solenoid, no volyage woulf point to a faulty PCB

Answered 5 years ago by George Thomson

Hi
I have checked for voltage on the solenoid coil it reads zero?
Is it possible to buy a new board.

regards

Paul

Answered 5 years ago by Richard Reynolds

www.showerdoc.com/galaxy-pcb-a4-desire-sg06033

This is the part.

Answered 5 years ago by Barrie Seabright

HI.
Thank you for the delivery of the PCB for my Galaxy Aqua 4000SI which came on Friday 10.08.2018.
I have fitted the PCB but the shower unit still does not work. There are no lights on the panel, looks dead.
I have checked the electricity supply its OK.

Please advise what I need to do next.

Regards

Richard Paul Reynolds

Answered 5 years ago by Richard Reynolds

Hi.
Please ignore my last message??
The shower unit is now working, but I have a water leak form the spindle of the flow control valve with the front cover fitted.
It does not leak with the cover removed.
If a small amount of finger pressure is applied to the spindle water drips from around the spindle.
Is it possible to replace the seal?

Regards

Paul

Answered 5 years ago by Richard Reynolds

www.showerdoc.com/mira-excel-cartridge-assembly-451-71

This item may solve the problem.

Answered 5 years ago by Barrie Seabright

Hi,
I don't think so . My shower is a galaxy aqua 4000si.
Part shown will not fit this shower..

Any other ideas

Paul

Answered 5 years ago by Richard Reynolds

www.showerdoc.com/galaxy-flow-valve-assembly-a2-3-si-ax2-3-wh-sg08086

;-) I see what you mean. My copy and paste went the wrong way.

Answered 5 years ago by Barrie Seabright

Hi,
Water Leak on flow valve spindle.
Is it possible to repair???
Any Ideas

Paul

Answered 5 years ago by Richard Reynolds

www.showerdoc.com/galaxy-flow-valve-assembly-a2-3-si-ax2-3-wh-sg08086

Replace the above to stop the leak.

Answered 5 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua 4000si (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.