This question is regarding Galaxy Aqua Premiere Electric Water Heater (2010 - Current) - Spare Parts

Which part is faulty

It's fine to turn water tap on, the light is on, and the water is hot. The problem is when you turn the water tap off, the light is still on. After about 10 seconds, you hear some noise inside and it cuts off. By pressing the reset button, it works again, then the same problem happens again.
Asked 3 years ago by Ben Ren, Manchester
One of the micro switches is faulty / stuck in the on position and this is keeping the element energised all the time.

Switch off at the isolator when the shower is not in use until this is fixed.

It is possible that you may have to replace the complete flow switch assembly.

www.showerdoc.com/redring-flow-switch-powerstar-p-stream-pro-93793818

Answered 3 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Aqua Premiere Electric Water Heater (2010 - Current) - Spare Parts

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Other Spares Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Other Spares

For any other support request please get in touch.