This question is regarding Galaxy G2000LX Power Shower

galaxy g2000lh

hi shower stops and starts i have checked oms at soloniod 3.5 and i have taken out brushes which are under 20mm i have ordered new ones which are 25mm can this be the problem thanks tim i dont see any brushes on your site ?
Asked 8 years ago by Tim
You may have a pcb fault or it still maybe the solenoid.
Replacing the brushes may not help.

Answered 8 years ago by Anonymous

OK ILL TRY THE BRUSHES FIRST SEE WHAT HAPPENS BUT I DO HAVE 3.5OMS AT THE SOLINOID ANY OTHER ADVICE THANK YOU

Answered 8 years ago by Tim Darcy

There is a chance that a pcb could be the cause.

Answered 8 years ago by Anonymous

HI IS THERE ANY WAY FOR ME TO CHECK THE PCP BOARD WHAT THE SHOWER WAS DOING WAS TURNING ON AND THEN OFF THANKS TIM

Answered 8 years ago by Tim Darcy

The only way to check it is by replacing it.

Answered 8 years ago by Anonymous

hi its tim again in ireland i tryed to put new brushes in galaxy g2000lx which were too long put old ones back in only one third gone there are 7 presure setting on shower it will only work on number 1 any ideas thanks tim

Answered 8 years ago by Tim Darcy

When you say stops and starts do you mean the water stops flowing or the motor cuts out/

If it is the motor that is cutting out then the brushes may be the answer

If it is the water then it is likely to be the solenoid (The resistance needs to be measured immediately it cuts out)

Answered 8 years ago by Anonymous

View Product and Order Online:

Do you require any more information about this shower?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy G2000LX Power Shower

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Showers page. Alternatively, if you're looking for any other brands you should view our full range of Showers.

If you would like to buy this item or look at something similar, please consider one of our Replacement Galaxy

For any other support request please get in touch.