This question is regarding Galaxy Pressure Switch Assy. - SG06032

REPLACEMENT

I initially had a problem where the Low pressure light was flickering with the water temperature changing, to a point when the light remained on with now cold water coming through. I was advised to change the TCO to which I did to no effect. An electrician had a quick look for me and he identified the problem to be the above Pressure switch as when he isolated the switch, the shower worked ok. I have since exchanged the TCO for the pressure switch and replaced this. The low pressure light no longer comes on, only the auto reset light which I believe should come on, however still only have cold water.
Asked 7 years ago by Mick
A faulty TCO will have no continuity across the two terminals. Therefore a good TCO will have power at both connections and a faulty TCO will have power at only one. The auto reset usually means that the tco is faulty. The problem may stem from the pcb.But there is no way to test this.

Answered 7 years ago by Barrie Seabright

Is it possible that the TCO and the pressure switch were faulty. Would it pay to replace the TCO as well

Answered 7 years ago by Mick Noone

It is possible that both these items are faulty, but you should test the various items in the shower in order to find out which are faulty and which are not.

Answered 7 years ago by Barrie Seabright

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Pressure Switch Assy. - SG06032

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Other Spares Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Other Spares

For any other support request please get in touch.