Galexy Serene 9.5 kw overheat light

My Overheat/ Increase Flow light is coming on

Asked 12 years ago by Anonymous

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety devicewill turn
the power off until it cools Then it all starts again

Make sure that the shower head is clean and clear,that the hose isn’t kinked (this can happen just behind the hand set where itis difficult to see) also check the inside of the hose although it can look OKon the outside it could have collapsed internally

Answered 12 years ago by Anonymous

I have got the same problem, the water preasure is great, the valves are fully open, but water still runs cold and overheat/ increas flow light is on, even turning the shower to cold, what could cause this?

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Galaxy Serene Deluxe (Electric Shower) - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Galaxy Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Galaxy Electric Showers

For any other support request please get in touch.