Solenoid on G2000LX

The water flow on my G2000LX shower stops after about 5 minutes of use (the pump and everything else continues to run, just no water comes out of the head). I did the following: 1. Turned off the power at the fuse box then tested the resistance of the solenoid - was ~3.6k 2. Turned the mains back on and ran the shower until the water stopped flowing (5 to 7 minutes) 3. Turned off the shower, then turned off the mains, and tested the resistance again - nothing at all 4. After about 10 minutes, the resistance returned. Does it sound like replacing the solenoid will fix the issue? I can see no other leaks above the solenoid. Can I just buy the solenoid coil or will I have to buy the whole assembly (SG06187)? Also are there fitting instructions anywhere? Thanks!
Asked 6 years ago by Gurbir
Yes , it sounds like the solenoid is faulty.

www.youtube.com/watch?v=NzJjzWqxesc&t=185s

This should help.

Answered 6 years ago by Barrie Seabright

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Hydra Universal Electric Shower Solenoid Coil (no valve included) - 27600

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Other Brands Solenoid Valves & Coils Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Other Brands Solenoid Valves & Coils

For any other support request please get in touch.