Cartridge fitting instructions
Unfortunately no instructions
However they are fairly easy to fit
Make sure you have the water turned off
Remove the knobs and cover plates
You should then see the black gear box cover remove this (2screws)
Then remove the gears and spindle (the screws on top of thegears need to be slackened ....Not removed to allow the cogs to come off)
You can now see the tops of the flow cartridges
Remove them and fit the new cartridges.
The only thing you need to be careful with is when you fitthe cartridges make sure that they are both in the fully open or fully closedposition.
The secret is, observing very carefully when thing are takento bits, their order and orientation, taking notes and/or photos as you go canalso be a help.
If you think you can do the job but aren’t just thatconfident, it may help to buy the part and compare it to the faulty part, youwill then be able to see where the screws, nuts, or washers etc. go, if thenyou think it is to complicated, at least you will have the part when theplumber arrives.
Looking at the above I guess that I have just made a set ofinstructions for replacing the cartridges!!!!
Answered 12 years ago by Anonymous
View Product and Order Online:
Do you require any further help with Tap or Shower Cartridges?
Please click the following link if you would like to see other answers or ask a question regarding the Trevi 1/2"" DX 1/4 Turn Flow Cartridge, Anti Clockwise Close
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Trevi Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.
If you would like to buy this cartridge or look others from the same brand, please view our Replacement Trevi Cartridges (All)
For any other support request please get in touch.