This question is regarding Mira 722 - Shower Spares

722 on Combi - worked but then...

Hi I have a client, they had a combi fitted a couple of years back. All fine with the 722 until very recently. Now they can only get piping hot water.

Looking at previous posts it looks like it's not worth trying to fix it as it's designed for low pressure supplies.

Is the best advice to replace for another valve? Thanks.
Asked 10 years ago by David
There is a High Pressure cartridge,

http://www.showerdoc.com/mira-722-hp-cartridge-902-23

or fitting PRV`s to the inlet pipes, and regreasing / fitting a service kit.

Answered 10 years ago by Anonymous

Went round and had a look. This valve was on the previous combi for 10 years. Had a look and it's the temp control lever that moves the splined temp control that's the problem. The splines on the plastic have gone. So no adjustment. This spare appears to be no longer available? I am I correct?

Answered 10 years ago by David Hamer

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira 722 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.