This question is regarding Mira 723 - Shower Spares

mira 723 seized

Hi Pillar and sleeve seized solid. Made worse as built into wall. Solution?
Asked 5 years ago by Mat Windrum, Saltash
WD 40 ?

Perhaps some gentle heat (Take care they are easy to damage)

take your time and ease it out gently.

Not an easy job .....Best of luck

Ultimately these parts can be replaced.

Answered 5 years ago by George Thomson

Hi
Thanks for the tip. I have a magnesium problem so some force was needed but succeeded eventually.

However shower running at 37 min 40 max degrees at all settings. Have adjusted once by 3 sets but made a small increase 2 degrees up but still no cold!. Hot source 49.7 degrees. Any ideas?

Answered 5 years ago by Mat Windrum

www.showerdoc.com/mira-723-shower-spares

See the video at the bottom of this link.

Answered 5 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira 723 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.