Mira 8 service pack
I am about to order a service pack from you. I must have replaced the bits 7 or 8 times over the last twelve years or so and I have now learnt to have a kit to hand.
When I service the shower everything is fine for up to a couple of months and then the big black fluted knob used to turn it on and off gets stiffer and stiffer until two hands are necessary to operate the knob.
I have used the grease provided with the kit and I have even bought lithium grease (a suggestion from the web) but nothing seems to cure the problem.
The entire mechanical core of the shower has even been changed.
Am I doing something wrong? Have you any suggestions please?
Thank you
Phil Pickering
The internals have become worn and as you screw the valve open and shut the internal components are slightly misaligning and by having to use both hands you are forcing them past each other, this is also why you are having to replace the seals so regularly they are wearing out because of the wear on the other components.
http://www.showerdoc.com/internal-set-cartridge-mira-8-904-08
Answered 9 years ago by Anonymous
View Product and Order Online:
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Mira 8 Service Pack - 935.16
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira
For any other support request please get in touch.