Mira 8 Assembly

I have purchased a new Mira 8 Internal Set but there are no assembly instructions, It is supplied with 2 "O" Rings and a fibre washer.

The Large "O" ring obviously fits the outer cover but it is not obvious where the smaller "O" ring and the fibre washer should be fitted

as these are absent from my old set.

Do you have assembly instructions or diagram. Many thanks.
Asked 11 years ago by Anonymous
http://www.showerdoc.com/mira-8-shower-spares

Looking at the diagram above ,

the grey washer goes inside the body at the end of part 16, the first "A" on the right

The small fat "O" ring goes inside the neck of the screw section after part 17

The copper coloured washer goes over the neck of the spindle and rests apon the yoke.
Shown inside the 3rd "A" from the left.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira 8 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.