This question is regarding Mira 88 - post 1984 - Shower Spares

I have an old Mira 88 model

This was installed around 10 years ago before we bought the house. This was fitted to a combi boiler and works ok except that the temperature could do with being a luittle hotter. I know that showers come with a safe operating temperature which is fixed but I would like to change this...I know this can be done on most showers but can it be done on this shower and if so how?
Asked 9 years ago by Anonymous

www.showerdoc.com/mira-88-post-1984-shower-spares

You may find that there is a difference if you service the internals, see the video on the link above.

This shower is designed for a low pressure system so fitting a PRV to the cold side to balance it with the hot may also help.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira 88 - post 1984 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.