Mira 88 service pack passing

Hi,

I fitted the service pack, correctly I believe, but now the shower will not turn off completely. There is a constant drip from the shower head. What could be causing this?

Thanks
Asked 10 years ago by Anonymous

It is the two small ‘O’ rings on the ends of the pistons(Part 17) that shut the water off http://www.showerdoc.com/mira-piston-assembly-025-14make sure that they are in place and haven’t been nicked when they were fitted.

(On the older units the piston assembly is slightlydifferent however the seals are the same)

It is unusual but not impossible that if the old seals were completelyworn away you can get the brass of the piston rubbing against the brass of thebody, therefore wearing the body and not allowing the seals to fit properly.

Answered 10 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira 88 - post 1984 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.