mira 915A shower going hot/cold

my mira 915A shower is giving me hot water for a few minutes, then it is going to cold water , this is happening daily now, i never know what to expect
Asked 12 years ago by Anonymous

 If you are on a combi boiler carry out the check below

 

Regarding the temperature fluctuation or cool running it could be a faulty cartridge however to check this, see if you can get hold of the hot supply pipe before it enters the shower or perhaps as it leaves the boiler.

 

If when holding this pipe the temperature fluctuates or goes cool then the problem is not with the shower but more likely with the boiler as the shower can only deliver what the boiler sends to it.        #

 

Disregard the temperature at the taps as they have a different flow rate.

 

If you are not on a combi then the first thing to do is strip down the temperature side of the shower strip the cartridge give it a clean lube and fit a service kit.

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira 915 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.