This question is regarding Mira Advance ATL - post 2003 - Shower Spares

Advance Memory. Int not heating

Hi. I have checked all questions on here and most answers point to a faulty relay pcb. My shower has had relay pcb replaced in the past for the usual relays clicking followed by no heat and unable to switch off. New fault now is that sometimes the heat will disappear and flow will increase, service light comes on and unable to switch off. Have replaced relay pcb and found to have exact symptoms again. All five memory settings now seem wrong too. Can the control pcb be faulty? Don't want to waste money on a relay board if it is the other one causing the problem.
Asked 11 years ago by Anonymous
It may be a damaged MULTI CONNECTOR or one of the pins connecting it to the relay board is bent. If not then you can suspect the control PCB.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.