This question is regarding Mira Advance ATL - post 2003 - Shower Spares

Mira Advance ATL Flex cutting out on High Flow

Occasionally the shower has cut out on low pressure etc, usually by re-starting on low temperature and then gradually building it up it will run on high setting again fine. This morning went to switch on and nothing happened, don't recall any lights on either. I switched all power off to the shower for 30 seconds and powered back up, shower switched on fine on High Flow but then heard relay clicking and water flowrate dropped to a low flowrate. I could have a shower ok on Low or Medium flow but when set to High flow with temp around 6 on the dial it cuts out and flowrate drops. If I kept on pressing the High Flow button it seemed to maintain the shower on High but could hear relays clicking. From everything I have read here am assuming I probably need a relay board ? Thanks
Asked 11 years ago by Anonymous

I would check the inlet filter, hose and head for blockages and replace the relay board.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.