Mira Advance Atl Flex water not getting hot

I've just moved into a house with the above model.



The water from my unit will only get luke warm



The shower beeps 3 times and the power button flash's which would suggest it's the beab care range.



I've tried adjusting the max temp range. But it doesn't seem to make a difference in the end result. I've had my hand under the shower head whilst it's been going through it re-commissoning cycle and the water does get hot!



So I'm abit unsure what to do!



Thanks,



Mike
Asked 9 years ago by Anonymous

www.showerdoc.com/mira-advance-post-2007-shower-spares


If the shower is one of those shown above you can try and recommission it.

Switch the main power off to the shower. Set the temperature dial to 8. Switch it back on and within 30 secs press your fore finger and thumb onto the High/Low button and the On/Off button at the same time.

At the first beep let go the On/Off button and at the second beep let go the High/Low button.

Leave the shower till it stops running.

 

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.