This question is regarding Mira Advance ATL - post 2003 - Shower Spares

Mira Advance ATL Thermostatic Electric Shower 9KW 1.1643.001, 9 kW

On the power button it won’t stop flashing blue what do I do
Asked 4 years ago by Jack Brown, Lincolnshire
Check that there is water getting to the shower, and that there is 230-240v into the shower. If so then , you can try a reset to see if that works.

Switch off the power to the shower , set the temperature dial to 9, switch on the power to the shower, within 30 seconds push the power button and the high/low button simultaneously, you should hear a beep, release the on/ off button, you should hear a second beep, release the high/low button.
The shower should now go through its commissioning process. The high /low will flash at this time. When the light stops flashing , the shower is ready to use.

If at any point other lights flash or the shower beeps then you may have a faulty pcb, flow valve or front cover.

Answered 4 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.