This question is regarding Mira Advance ATL - post 2003 - Shower Spares

Mira Advance Memory

I have a mira advance memory. Occasionaly after use, the shower will turn itself back on with the service light showing and continualy spray cold water, the only way to shut it off is at the isolator outside. You have to leave the shower for some time before using again as otherwise it just continues with the service light on.Any ideas?
Asked 11 years ago by Anonymous

It could be a faulty relay board or faulty flow valve there is noway to know for sure.

However our experience is, if the service light comes on then it’smost likely to be a faulty relay board.

If it’s low pressure light then it’s most likely to be the flowvalve.

If you are unsure start with the relay board, this is the morecommon fault.

On a few occasions you may need both, if you need to be certainthen order both!

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.