This question is regarding Mira Advance ATL - post 2003 - Shower Spares

Shower keeps cutting out

My shower (advance 9.8 flex ATL587n 27/5) keeps cutting out. If I leave it for 3-5 mins it cuts out and fails to start for some time. Absolutely no light come on although the main switchto the shower indicates that the power is on.



If I start it up and turn it off and on numerous times fairly quickly it works fine, as long as I do not allow it to get to the cut out stage outlines above.



I believe it needs a new inlet sensor (Mira 405.50) circa £37 or a complete flow valve for an extra £15



Would this be right and is there much of difference in fitting the complete assembly or just the inlet sensor.



This is the second Mira shower that has behaved this way.
Asked 13 years ago by Conrad
I think it is much more likely to be the relay printed circuit board that is faulty and should be replaced, it can be ordered online by clicking on the link below, in some cases it will also have taken out the flow valve but would definitely start with pcb.

http://www.showerdoc.com/shower-spares/mira/MIRA-406-88-Relay-Board-and-Earth-Wire

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.