Tank assembly replacement

Is there any way I can determine the power of my model? By serial no.etc?If not can one tank assembly substitute for another.I ask because having replaced the inlet sensor to remedy constant low pressure turn offs,when the unit is now turned on and flow selected, there is no audible signal, or water flow,and the service light comes on immediately.The service manual seems to suggest that the outlet sensor could be at fault,which requires tha tank assembly to be replaced.Is this the case, or is the unit totally u.s.??? ANY HELP WOULD BE VERY MUCH APPRECIATED!!
Asked 13 years ago by David
The power rating is given on the label that shows the serial no., however from your description what you really need to replace is the printed circuit board which can be ordered online by clicking on the link below. Would warn you that in rare cases the flow valve can also have gone faulty and may also need replaced.

http://www.showerdoc.com/shower-spares/mira/MIRA-406-88-Relay-Board-and-Earth-Wire

Alastair

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance ATL - post 2003 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.