This question is regarding Mira Advance Flow Valve Assembly - 1643.149

Mira Advance ATL 2004 model.

Hi I recently repositioned a working unit and keep getting a low flow light followed by water shut off ! This all happens after flowing for about 4 seconds in both low med and high settings. The water pressure is over 1.5 bar and flow rate through unit with and without shower head is good. No heat signal appears to be sent to the appropriate relay but the shut off solenoid is obviously working. I havent checked the inlet filter yet because the flow though unit appears good . Flowrate remains unchanged when adjusting temp!!!! Any body got any ideas
Asked 10 years ago by Anonymous
With this shower the usual faults are the flow valve, which in your case seems to be working, and the relay board , which I would suspect maybe the culprit. 

Answered 10 years ago by Anonymous

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance Flow Valve Assembly - 1643.149

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Flow Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Flow Valves

For any other support request please get in touch.