This question is regarding Mira Advance - post 2007 - Shower Spares

Blows fuse in the house

The bit where the water comes through, once the shower is turned on it keeps shutting off and blowing the fuse in the house. Why is this happening. This only happens when the temp is turned up to hot
Asked 8 years ago by Sharon
It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

www.youtube.com/watch?v=wzPt1hsfVq4


If you don’t have a multimeter we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.


Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not) and lots of other jobs, in short they are well worth the £10.


www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester


If the elements are OK then the other possibility is a faulty relay board.

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance - post 2007 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.