This question is regarding Mira Advance - post 2007 - Shower Spares

mira shower

keeps going hot and cold and some times has pressure some times no pressure
Asked 11 years ago by Anonymous

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

Make sure that the shower head is clean and clear, that the hose isn’tkinked (this can happen just behind the hand set where it is difficult to see)also check the inside of the hose although it can look OK on the outside itcould have collapsed internally

If these are Ok then it could be a faulty relayboard or a faulty flow valve if the service light comes on at any time thenreplace the relay board

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance - post 2007 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.