This question is regarding Mira Advance - post 2007 - Shower Spares

Shower fails to commission correctly

My Advance ATL Standard has started failing intermittently. The water stops flowing, the water supply and reset lights illuminate and I have to reset it to get it working again. I've replaced the flow valve assembly but it still fails mid-flow. If I set the temperature to cold, it will run continuously but once the temperature control is raised to 4 or over, the fault re-occurs. I've tried cleaning out the tank assembly but it hasn't had any effect. Can you advise?
Asked 9 years ago by Phil

Try re commissioning the shower.

If this does not work then, you either need a new front cover or a new relay board.

www.showerdoc.com/mira-relay-board-including-screws-1643-104

www.showerdoc.com/mira-advance-standard-cover-assy-control-pcb-included

Substitution is the only way to find out which you need.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance - post 2007 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.