Shower turns off

During showering the shower suddenly turns off and displays no lights. When the isolating switch is turned off and back on usually the blue on off switch illuminates but sometimes it flashes along with the low flow button and reset light and the shower beeps. It sometimes takes 2 or 3 activations of the isolating switch for anything to happen.
Asked 7 years ago by Arthur
No guarantees without being able to test this however most likely fault is a faulty relay on the relay board.

www.showerdoc.com/mira-spare-relay-board-1643-104

Answered 7 years ago by George Thomson

Can the board be tested with a multimeter?

Answered 7 years ago by Anonymous

Since I placed the enquiry it is cutting out immediately the stop button is touched while showering without shutting off properly but sometimes it just cuts out.
Can I test anything with a multimeter?

Answered 7 years ago by Arthur Fentaman

Ok after touching the stop button during a shower it is cutting out with no lights showing but after 5 minutes it beeps with a flashing reset and low flow lights.

Please let me know what you think.

Answered 7 years ago by Arthur Fentaman

If both lights are flashing, and after trying a recommissioning that did not solve the problem, you should change the pcb and the flow valve.

Answered 7 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Advance - post 2007 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.