This question is regarding Mira Aquations - Shower Spares

Mira Aquations - Play in flow control

Hi



I have a Mira Aquation mixer shower which is 8 years old and whilst working perfectly a lot of play had developed in the flow control lever (approximately 3mm out from the mixer unit away from the wall). I would rather sort this before something goes wrong. Is this most likely wear in the flow cartridge assembly and I should replace this? I would also probably replace the seals behind the fascia plate at the same time.



Many thanks in advance



Keith Morrison
Asked 13 years ago by Anonymous
Before ordering anything check that handle retaining screw has not come loose as this is one possibility.
If this is not the case the remove handle and check spindle extension etc for damage.
Once you have established fault required part(s) can be ordered online via the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-90-Mira-Aquations

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Aquations - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Concealed Shower Valves

For any other support request please get in touch.