mira cold water inlet?
Could you please advise as to whether this Mia Flow Cartridge 1663.117 is the correct item to replace. Kind regards.
Ifyou have problems with an Excel then it's best just to replace thecartridge,however it is probably worth stripping the cartridge out and checkingthat the inlet filters are clean, before buying a new cartridge.
Turnoff hot and cold water supply
Pullfront temperature knob off The rest of the knob assy. just unclips
Remove4 screws that hold cartridge into body
Pullold cartridge forward shouldn't be too tight
Setnew cartridge for High/Low pressure (instructions withcartridge)
Slipnew cartridge into place remember to check that the new seals are allin place (and don't drop out as you push back)
Tightenscrews be careful not to over tighten
Refitknobs.
Turnon water and test. (Occasionally you will have to reset the cartridgetemperature, instructions with cartridge)
Easypeasy!!!!
Cartridge Mira 903.33 Thiscartridge supersedes the previous high and low pressure versions
Clickon the link below, choose the manufacturer of the shower you have,scroll down the list of parts and select the part number you require.
Youcan then purchase the items online or call the office on 0131 4439917 pressing option # 1 for spares.
Answered 9 years ago by Anonymous
View Product and Order Online:
Do you require any further help with Tap or Shower Cartridges?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Atom/Coda ERD Flow Cartridge - 1663.117
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.
If you would like to buy this cartridge or look others from the same brand, please view our Replacement Mira Cartridges (All)
For any other support request please get in touch.