Mira Azora Electric Shower - Not Very Powerful?

I have just installed a Mira Azora shower. It's my first electric shower. Followed all the installation instructions, flushed the plumbing to the shower prior to connecting and commisioned according to the instructions. I tested the water pressure to make sure its within the specified range (0.7 - 5.0 Bar), my water pressure is 3 bar so should be fine. But the shower is just underwhelming when turned on. It works as it should but its only marginally better than the old "attached to the cold tap" shower I had been using. I was really expecting something with a little more power. I've run through the settings and tried varying them. They don't seem to change the output pressure much. Would you class this shower as a "power shower"? I guess I'm looking for anything I may have done wrong during the installation what could be affecting the water flow.
Asked 5 years ago by Brian
This shower would not come under the heading of "power shower", but give you are getting 3 bar the shower should be performing well.

Not being able to see the installation etc. I would suggest that you go through it again , checking head, hose and inlet filter are clear , run the shower again, and if the same happens , contact Mira direct.

Answered 5 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.