This question is regarding Mira Azora - Shower Spares

Mira azora pressure

A few months back I asked why would my Mira shower only produce heat when I dropped the pressure coming into the unit, shower Doc suggested that my temp/ pressure valve was faulty. To support this suggestion, I removed the shower head and regardless of where I had the temp control, warm or cold, the pressure/ volume of water remained the same. I therefore ordered the new assembly. Unfortunately having just fitted the pressure unit, the fault remains, and the test as performed with the shower head off, has the same high volume, no matter where the switch rests. Any ideas?
Asked 9 years ago by Sharon
When replacing the flow valve , did you make sure that you turned the cog at the bottom of the heating tank fully clockwise before fitting the temperature control belt? If this was the case then you may have a fault in the tank. Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.