This question is regarding Mira Azora - Shower Spares

Mira Azora Water Pressure

I have a Mira Azora electric shower which is now around 3 years old. A few weeks back it started cutting off after about 10 mins (with the power light staying on), I looked up a similar problem on your Q&A sections and seen it was the solenoid that need replaced. I ordered and fitted a new solenoid which fixed the cutting out problem, however water pressure from the shower has now dropped considerably. It read through your Q&As again and picked up that it was recommended that the complete flow valve and inlet assembly be changed. I ordered this up and changed it over and the pressure problem is still there and now it doesn't heat the water as much as it had previously... Have I messed this up or is there something simple I've overlooked??



Many thanks.
Asked 10 years ago by Gary
It maybe that after changing the flow valve over you have not set up the temperature control correctly. I would check the setup again and also the elements in the heating can for damage.

Answered 10 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.