Mira escape

Fitted new t c o. Switch but shower still not working ,power light on and low flow light is orange, any ideas please
Asked 7 years ago by Bernard
The things to check first are:

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.



Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see)


if the above are OK then the most likley fault is a faulty flow valve.

www.showerdoc.com/mira-escape-sport-thermostatic-flow-valve-with-inlet-assembly-1563-540

Answered 7 years ago by George Thomson

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora/Sprint/Sport/Zest Thermal Cut-out (TCO) - 416.41

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Thermal Cut Outs

For any other support request please get in touch.