Mira Excel circa 1991/2 Installation

Hi, The shower has been working fine since approx date above but recently after use it drips from the shower head, do I need a replacement seal of some description or a new part to fix?
Asked 8 years ago by John
Normally if the shower is dripping when switched off then the ceramic sliders inside the cartridge are worn and changing seals externally will not change this for you. As the cartridges are sealed units, you will now need to replace the actual cartridge.

The 903.33 cartridge will fit models from - 1990 - 2002 - www.showerdoc.com/mira-cartridge-assembly-excel-select-903-33

Note: The 903.33 cartridge does come factory set to low pressure and this can be changed to high pressure on the back of the cartridge with the red key provided.

The 451.71 cartridge will fit showers from 2003> www.showerdoc.com/mira-sp-excel-cartridge-assy-451-71


Answered 8 years ago by Anonymous

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Excel/Select Thermostatic Cartridge - 903.33

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Mira Cartridges (All)

For any other support request please get in touch.