This question is regarding Mira Element - Built-in - Shower Spares

removing shower to fit shower panels

Can anyone please let me know the procedure for removing the shower plate in order to fit shower panels behind a built in Mira element? I don't have the owner Manuel, I've taken out the centre cap but cannot figure out how to proceed further. Kind regards, Paul, north Wales.







Asked 8 years ago by Anonymous

www.showerdoc.com/mira-element-built-in-shower-spares

Unscrew the handle and then remove the long grub screw, the handle will then come off.

You can then remove the wall plate.

Make sure that the panel depth does not interfere with the handle when it is reinstated.

www.mirashowers.co.uk/onlinecatalog/pdf/1143423_w2_a_mira_element_slt.pdf

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Element - Built-in - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Concealed Shower Valves

For any other support request please get in touch.